Application of multi-objective genetic algorithm in the structural optimization of battery box for new energy vehicles
Main Article Content
Abstract
As the rapid development of new energy vehicles places increasingly stringent requirements on battery safety, lightweight design, and thermal management, the structural optimization of battery boxes has become a critical engineering challenge. To address the conflicting objectives among structural strength, heat dissipation efficiency, and weight reduction, this study proposes a multi-objective optimization method based on a non-dominated sorting genetic algorithm. A parameterized battery box model is established, with mass, maximum deformation, and maximum operating temperature selected as optimization objectives. The optimization framework integrates structural and thermal performance constraints to achieve balanced design solutions. Numerical analysis demonstrates that the optimized battery box significantly improves mechanical strength and thermal management capability while reducing structural weight. The proposed approach effectively resolves complex multi-objective optimization problems and provides theoretical support for the integrated design of battery systems. In addition, the optimization strategy offers methodological references for electromagnetic compatibility considerations, thermal-field coupling analysis, and intelligent design of advanced energy storage systems.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
H. Fayaz, A. Afzal, A. D. M. Samee, et al., “Optimization of thermal and structural design in lithium-ion batteries to obtain energy efficient battery thermal management system (BTMS): a critical review,” Archives of Computational Methods in Engineering, vol. 29, no. 1, pp. 129-194, 2022, doi: 10.1007/s11831-021-09571-0.
D. Wu, F. Sun, Z. Qu, et al., “Multi-scale structure optimization of boron-doped hard carbon nanospheres boosting the plateau capacity for high performance sodium ion batteries,” Journal of Materials Chemistry A, vol. 10, no. 33, pp. 17225-17236, 2022, doi: 10.1039/D2TA04194D.
A. Zhang, R. Zhao, Y. Wang, et al., “Regulating the electronic structure of manganese-based materials to optimize the performance of zinc-ion batteries,” Energy & Environmental Science, vol. 16, no. 8, pp. 3240-3301, 2023, doi: 10.1039/D3EE01344H.
Y. Sun, J. C. Li, H. Zhou, et al., “Wide-temperature-range sodium-metal batteries: from fundamentals and obstacles to optimization,” Energy & Environmental Science, vol. 16, no. 11, pp. 4759-4811, 2023, doi: 10.1039/D3EE02082G.
Y. Zhang, X. Zheng, N. Wang, et al., “Anode optimization strategies for aqueous zinc-ion batteries,” Chemical Science, vol. 13, no. 48, pp. 14246-14263, 2022, doi: 10.1039/D2SC04945G.
Z. Huang, A. Mu, L. Wu, et al., “Comprehensive analysis of critical issues in all-vanadium redox flow battery,” ACS Sustainable Chemistry & Engineering, vol. 10, no. 24, pp. 7786-7810, 2022, doi: 10.1021/acssuschemeng.2c01372.
M. B. F. Ahsan, S. Mekhilef, T. K. Soon, et al., “Lithium-ion battery and supercapacitor-based hybrid energy storage system for electric vehicle applications: a review,” International Journal of Energy Research, vol. 46, no. 14, pp. 19826-19854, 2022, doi: 10.1002/er.8439.
H. Yang, D. Wang, Y. Liu, et al., “Improvement of cycle life for layered oxide cathodes in sodium-ion batteries,” Energy & Environmental Science, vol. 17, no. 5, pp. 1756-1780, 2024, doi: 10.1039/D3EE02934D.
D. Ioannidis, P. Rigopoulos, K. Braimakis, et al., “Multi-objective ANN-driven genetic algorithm optimization of energy efficiency measures in an NZEB multi-family house building in Greece,” Energy and Buildings, vol. 351, 116653, 2026, doi: 10.1016/j.enbuild.2025.116653.
H. Li, S. Li, R. Hou, et al., “Recent advances in zinc-ion dehydration strategies for optimized Zn-metal batteries,” Chemical Society Reviews, vol. 53, no. 15, pp. 7742-7783, 2024, doi: 10.1039/D4CS00343H.
C. Li, R. Kingsbury, L. Zhou, et al., “Tuning the solvation structure in aqueous zinc batteries to maximize Zn-ion intercalation and optimize dendrite-free zinc plating,” ACS Energy Letters, vol. 7, no. 1, pp. 533-540, 2022, doi: 10.1021/acsenergylett.1c02514.
B. Zhong, C. Liu, D. Xiong, et al., “Biomass-derived hard carbon for sodium-ion batteries: basic research and industrial application,” ACS Nano, vol. 18, no. 26, pp. 16468-16488, 2024, doi: 10.1021/acsnano.4c03484.
J. C. León Gómez, S. E. De León Aldaco, and J. Aguayo Alquicira, “A review of hybrid renewable energy systems: architectures, battery systems, and optimization techniques,” Eng, vol. 4, no. 2, pp. 1446-1467, 2023, doi: 10.3390/eng4020084.
S. Wang, H. Gao, P. Takyi-Aninakwa, et al., “Improved multiple feature-electrochemical thermal coupling modeling of lithium-ion batteries at low-temperature with real-time coefficient correction,” Protection and Control of Modern Power Systems, vol. 9, no. 3, pp. 157-173, 2024, doi: 10.23919/PCMP.2023.000257.
B. Tao, D. Zhong, H. Li, et al., “Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges,” Chemical Science, vol. 14, no. 33, pp. 8693-8722, 2023, doi: 10.1039/D3SC02093B.