Research on the Construction of an Indoor “Reversible Decoration” System Based on Material Cycle Mapping
Main Article Content
Abstract
Efficient material traceability and lifecycle management are essential for achieving circular utilization in indoor renovation projects. This study proposes a reversible decoration framework based on a Digital Material Cycle Map (DMCM) to support the tracking, recovery, and reuse of construction materials throughout their service lifecycle. The framework integrates Digital Product Passport concepts, RFID- and QR-based identification, distributed ledger technology, and lifecycle data management to establish a unified material information architecture. A modular and detachable construction strategy is further developed using standardized interfaces and non-destructive disassembly mechanisms, enabling efficient component recovery and reuse. In addition, a material traceability workflow is introduced to support condition assessment, lifecycle auditing, and recycling decision-making based on dynamically updated records. The framework promotes information sharing among manufacturers, designers, contractors, and recycling organizations through standardized data interfaces. By combining material identification, information transmission, and lifecycle monitoring, the proposed approach provides an engineering-oriented solution for digital material governance, intelligent sensing, and distributed infrastructure management.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
F. Zhang, L. Ding, and Z. Wen, “The Application and Research of Immersive Virtual Reality Technology in the Interior Decoration of Guanzhong House Architecture,” Applied Mathematics and Nonlinear Sciences, pp. 10(1), 2025, doi: 10.2478/AMNS-2025-0088.
S. Wang, “Green home decoration: the application study of sustainable materials in residential decoration,” The Art & Design Research, pp. 5(3), 2024, doi: 10.37420/J.ADR.2024.036.
J. Pan and L. Wang, “Analysis of the Application of Traditional Culture in Modern Design,” Journal of Social Science Humanities and Literature, pp. 6(6), 2023, doi: 10.53469/JSSHL.2023.06(06).18.
X. Qian and J. Qian, “Hierarchical structure nano-photocatalytic materials in interior decoration design,” International Journal of Materials and Product Technology, vol. 69, no. 3-4, pp. 179-198, 2024, doi: 10.1504/IJMPT.2024.145770.
N. Shushunova, E. Korol, E. Luzay, et al., “Impact of the Innovative Green Wall Modular Systems on the Urban Air,” Sustainability, pp. 15(12), 2023, doi: 10.3390/SU15129732.
L. Shan, B. Yun, and H. Lingling, “Application of Image Style Transfer Technology in Interior Decoration Design Based on Ecological Environment,” Journal of Sensors, 2021, doi: 10.1155/2021/9699110.
L. Zhang, “Research on the Application of Green Design Concept in Interior Design,” Journal of Architectural Research and Development, pp. 4(4), 2020, doi: 10.26689/JARD.V4I4.1460.
J. Ling, “The Application of Natural Elements in Interior Landscape Design and its Principal Analysis,” Journal of Architectural Research and Development, vol. 5, no. 5, pp. 12-15, 2021, doi: 10.26689/JARD.V5I5.2514.
X. Sun, D. Qi, and X. Huang, “Application of environmental protection decoration materials in interior decoration engineering,” International Journal of Materials and Product Technology, vol. 67, no. 3-4, pp. 207-222, 2023, doi: 10.1504/IJMPT.2023.136525.
S. Lun W, J. Mei R, and D. Yao X, “Chinese Decorative Color Based on Improved AlexNet in Interior Decoration Design,” Mathematical Problems in Engineering, 2022, doi: 10.1155/2022/2358905.
M. Kolovou, C. Potiriadis, and N. Kallithrakas-Kontos, “A study on the correlation between indoor radon concentrations and the construction year of the dwellings,” European Physical Journal: Special Topics, Art. no. 232(10), 2023, doi: 10.1140/epjs/s11734-023-00888-4.
C. Chunna, “Research on Innovative Application of Artistic Characteristics of Building Decoration Materials in Interior Design Based on Big Data,” Journal of Physics: Conference Series, vol. 1744, no. 2, Art. no. 022020, 2021, doi: 10.1088/1742-6596/1744/2/022020.
B. Yun Y, J. Park H, S. Yang, et al., “Integrated analysis of the energy and economic efficiency of PCM as an indoor decoration element: Application to an apartment building,” Solar Energy, vol. 196, pp. 437-447, 2020, doi: 10.1016/j.solener.2019.12.006.
L. Yuanyuan, “The Analysis of the Innovative Application of the Architectural Decoration Materials in the Interior Design,” Proceedings of 2019 7th International Education, Economics, Social Science, Arts, Sports and Management Engineering Conference (IEESASM 2019), pp. 602-605, 2019, doi: 10.26914/c.cnkihy.2019.041430.
Q. Wu and C. Zeng, “Construction and Optimization of CAD Teaching System for Interior Decoration Design Major,” Computer-Aided Design and Applications, pp. 67-78, 2022, doi: 10.14733/cadaps.2023.s4.67-78.