Expanding the Application of Boron-Doped Modified Diamond Electrodes in the Treatment of Recalcitrant Organic Pollutants
Main Article Content
Abstract
Wastewater from textile, leather, pharmaceutical, and chemical industries contains high concentrations of recalcitrant organic pollutants, which are difficult to mineralize completely using conventional biological or chemical processes and pose persistent ecological risks. Boron-doped diamond (BDD) electrodes, with a wide electrochemical potential window, high oxygen evolution overpotential, strong hydroxyl radical generation ability, and excellent chemical stability, provide an effective electric-field-driven route for advanced oxidation treatment. This paper systematically reviews the preparation processes, structural optimization, and electrochemical performance of BDD electrodes, and analyzes the roles of boron doping, substrate selection, surface termination, and functional modification in regulating conductivity, interfacial activity, and long-term stability. The degradation mechanism of recalcitrant organics is discussed from the perspectives of quasi-free hydroxyl radical oxidation, direct electron transfer, adsorption-controlled interfacial reactions, and mineralization pathways. Potential applications in textile dyeing wastewater, pharmaceutical wastewater, emerging pollutant degradation, and wastewater reuse are further examined. In addition, the synergistic coupling of BDD electrochemical oxidation with biological treatment, membrane separation, photocatalysis, and ultrasonic enhancement is evaluated for improving mass transfer, energy efficiency, and process stability. The analysis shows that BDD electrodes have strong engineering potential for high-COD and chromatic industrial wastewater treatment, while future scale-up requires lower-cost electrode fabrication, optimized flow-field design, and intelligent control of electrochemical parameters.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
D, “Terrón, J.P,” Holgado-Vázquez, Rosales E, et al. Zn-MIL53(Fe) as an electro-Fenton catalyst: Application in organic pollutant degradation and pathogen inactivation. Separation and Purification Technology, pp. 360(Part1), 2025, doi: 10.1016/j.seppur.2024.130881.
C. Ying, “Metal-Organic Framework as a New Photocatalyst for Environmental Pollutant Treatment,” IOP Conference Series: Earth and Environmental Science, vol. 631, no. 1, Art. no. 012021 (8pp), 2021, doi: 10.1088/1755-1315/631/1/012021.
N. Chandran N, R. Jayakrishnan, and R. Abraham, “Role of pore size on the photocatalytic dilapidation of organic pollutant SRB in mesoporous In2S3,” Journal of Chemical Sciences, pp. 135, 2023, doi: 10.1007/s12039-023-02193-y.
R. Bacha A U, I. Nabi, Chen Yaogang, Li Zhiyang, Iqbal Amjad, Liu Wenjie, Afridi Muhammad Naveed, Arifeen Awais, Jin Wenbiao, and Yang Lei, “Environmental application of perovskite material for organic pollutant-enriched wastewater treatment,” Coordination chemistry reviews, vol. 495, no. Nov., pp. 1.1-1.22, 2023, doi: 10.1016/j.ccr.2023.215378.
M. Rashid M, N. Abir, Bin Kamal, Shafat AhmedAl-Amin, and Md, “Ahamed, Md,” Ahasan Islam, Mohammad TajulIqbal, Mohammad Irfan. Functionalized Cellulose for Textile Organic Pollutant Treatment: a Comprehensive Review. Water Conservation Science and Engineering, pp. 9(1), 2024, doi: 10.1007/s41101-024-00243-1.
H. Al-Kaabi F K, “Treatment of Organic Pollutant by Advanced Oxidation Processes,” International Journal of Innovative Science and Research Technology (IJISRT), pp. 431-439, 2024, doi: 10.38124/ijisrt/ijisrt24sep243.
Z. Gan, S. Ma, Y. Zhang, et al., “Application of hydrophobic selective stimuliresponsive polymer membranes in organic pollutant treatment in aqueous phase,” Journal of Applied Polymer Science, vol. 141, no. 27, pp. 10, 2024, doi: 10.1002/app.55602.
K. Lin Z, S. Lin J, H. Chen Z, et al., “Electrogelated drug-embedded silk/gelatin/rGO degradable electrode for anti-inflammatory applications in brain-implant systems,” Journal of Materials Chemistry, B: Materials for Biology and Medicine, vol. 12, no. 5, pp. 11, 2024, doi: 10.1039/D3TB02715E.
S. Sangamithirai V and S. Chandrasekar, “Partial Discharge Analysis of Bio Degradable Nano Filled Oil Under Different Electrode Geometry,” 2023 Innovations in Power and Advanced Computing Technologies (i-PACT), pp. 1-5, 2023, doi: 10.1109/i-pact58649.2023.10434402.
Y. Hao, P. Ma, H. Ma, et al., “Electrochemical treatment of synthetic wastewaters contaminated by organic pollutants at Ti4O7 anode: experimental results and theoretical modelling,” ChemElectroChem, 2022, doi: 10.1002/celc.202101720.
Z. Hajalifard, M. Mousazadeh, and M. Khademi H S, “The efficacious of AOP-based processes in concert with electrocoagulation in abatement of CECs from water/wastewater,” npj clean water, pp. 6(1), 2023, doi: 10.1038/s41545-023-00239-9.
T. Islam M, A. Sadmani A H M, and B. Chang N, “A Quantum Virtual Laboratory for Exploring Semiconductor Heterostructures Unlocks the Photocatalytic Destruction Potential of Per-and Polyfluoroalkyl Substances,” The Journal of Physical Chemistry C: Energy Conversion and Storage, Optical and Electronic Devices, Interfaces, Nanomaterials, and Hard Matter, vol. 129, no. 26, pp. 11927-11937, 2025, doi: 10.1021/acs.jpcc.5c01779.
E. Kik O, F. Zaviska, G. Lesage, et al., “Optimizing electro-oxidation for selective trace micropollutant removal and energy efficiency in secondary effluents,” Water Research, vol. 291, no. c, Art. no. 125158, 2026, doi: 10.1016/j.watres.2025.125158.
A. Balseviciute, I. Patio-Cantero, J. Carrillo-Abad, et al., “Degradation of multicomponent pharmaceutical mixtures by electrochemical oxidation: Insights about the process evolution at varying applied currents and concentrations of organics and supporting electrolyte,” Separation and Purification Technology, pp. 362(Part1), 2025, doi: 10.1016/j.seppur.2025.131697.
H. Ding, Q. Ma, X. Zhang, et al., “Material Design and Operation Strategy of the Electro-Fenton System for the Treatment of High Pollutant Load Wastewater,” Sustainability (2071-1050), pp. 17(23), 2025, doi: 10.3390/su172310501.