Stable Operation Strategy for Near-Zero Discharge Evaporation and Crystallization System of Coal Chemical Wastewater Based on Model Predictive Control (MPC)
Main Article Content
Abstract
With the increasing integration of intelligent sensing, industrial communication networks, and Electromagnetic Waves, Antennas and Propagation technologies in smart process industries, stable control of complex multivariable systems has become essential for reliable information acquisition and distributed decision-making. This study proposes a stable operation strategy for a near-zero discharge evaporation and crystallization system for coal chemical wastewater based on model predictive control (MPC). A discrete state-space model incorporating influent chemical oxygen demand, salt concentration disturbances, liquid level–concentration coupling, and steam network constraints is established to characterize the dynamic behavior of the process. A rolling optimization controller integrating feedforward compensation and quadratic programming is developed to coordinate feed flow, steam regulation, and circulation control under multiple operational constraints. Simulation and industrial validation demonstrate that the proposed strategy reduces liquid level overshoot by 82.4%, decreases steam consumption fluctuation by 66.1%, and maintains stable operation with a water reuse rate above 92.3% under severe disturbance conditions. The results confirm that the MPC-based framework significantly enhances disturbance rejection, robustness, and energy efficiency while providing an effective engineering solution for cyber–physical industrial systems. Furthermore, the proposed architecture offers valuable references for communication-enabled intelligent monitoring, distributed sensing, and industrial automation applications associated with Electromagnetic Waves, Antennas and Propagation technologies.
Downloads
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
Y. Zhang, H. Li, T. Ramirez Reina, et al., “Coal chemistry industry: from production of liquid fuels to fine chemicals to carbon materials,” Energy & fuels, vol. 37, no. 23, pp. 17754-17764, 2023, doi: 10.1021/acs.energyfuels.3c02661.
Y. Guo, L. Peng, J. Tian, et al., “Deploying green hydrogen to decarbonize Chinas coal chemical sector,” Nature communications, vol. 14, no. 1, pp. 8104-8115, 2023, doi: 10.1038/s41467-023-43540-4.
X. Liu, “Low-carbon utilization of coal gangue under the carbon neutralization strategy: a short review,” Journal of Material Cycles and Waste Management, vol. 25, no. 4, pp. 1978-1987, 2023, doi: 10.1007/s10163-023-01712-w.
T. Zhang, M. Zhang, L. Jin, et al., “Advancing carbon capture in hard-to-abate industries: technology, cost, and policy insights,” Clean Technologies and Environmental Policy, vol. 26, no. 7, pp. 2077-2094, 2024, doi: 10.1007/s10098-024-02810-5.
M. Tang, S. Zhang, Z. Bai, et al., “Power control of generator sets in coal-fired power plants based on the combination of MPC and neural network PID,” Journal of Industrial and Management Optimization, vol. 22, no. 1, pp. 450-485, 2026, doi: 10.3934/jimo.2026017.
P. Mohindru, “Review on PID, fuzzy and hybrid fuzzy PID controllers for controlling non-linear dynamic behaviour of chemical plants,” Artificial Intelligence Review, vol. 57, no. 4, pp. 97-125, 2024, doi: 10.1007/s10462-024-10743-0.
J. Huo, Z. Wang, C. Oberschelp, et al., “Net-zero transition of the global chemical industry with CO 2-feedstock by 2050: feasible yet challenging,” Green Chemistry, vol. 25, no. 1, pp. 415-430, 2023, doi: 10.1039/D2GC03047K.
M. Jiang, Y. Cao, C. Liu, et al., “Tracing fossil-based plastics, chemicals and fertilizers production in China,” Nature Communications, vol. 15, no. 1, pp. 3854-3866, 2024, doi: 10.1038/s41467-024-47930-0.
A. Znad O, O. Mohamed, and A. Elhaija W, “Speeding-up startup process of a clean coal supercritical power generation station via classical model predictive control,” Process Integration and Optimization for Sustainability, vol. 6, no. 3, pp. 751-764, 2022, doi: 10.1007/s41660-022-00243-5.
Q. Li, L. Yu, T. Liu, et al., “Enhancing Efficiency in Coal-Fired Boilers Using a New Predictive Control Method for Key Parameters,” Sensors, vol. 26, no. 1, pp. 330-348, 2026, doi: 10.3390/s26010330.
D. He, W. Zhan, Y. Kang, et al., “Gaussian process-based economic MPC with delay compensation for sncr-scr combined denitration systems,” Industrial & Engineering Chemistry Research, vol. 63, no. 45, pp. 19628-19639, 2024, doi: 10.1021/acs.iecr.4c02065.
U. Shah, A. Paulson J, and R. Bakshi B, “Real-time synergies between homeostatic technological and homeorhetic ecological systems by multiscale MPC and Bayesian optimization,” Industrial & Engineering Chemistry Research, vol. 63, no. 49, pp. 21389-21403, 2024, doi: 10.1021/acs.iecr.4c02417.
Y. Yu, J. Hou, A. Jahanger, et al., “Decomposition analysis of Chinas chemical sector energy-related CO2 emissions: From an extended SDA approach perspective,” Energy & Environment, vol. 35, no. 5, pp. 2586-2607, 2024, doi: 10.1177/0958305X231151682.
A. Bashir M, T. Ji, J. Weidman, et al., “Plastic waste gasification for low-carbon hydrogen production: a comprehensive review,” Energy Advances, vol. 4, no. 3, pp. 330-363, 2025, doi: 10.1039/D4YA00292J.
X. Wu, Y. Dong, J. Zhao, et al., “Distribution, sources, and ecological risk assessment of polycyclic aromatic hydrocarbons in surface water in the coal mining area of northern Shaanxi, China,” Environmental Science and Pollution Research, vol. 30, no. 17, pp. 50496-50508, 2023, doi: 10.1007/s11356-023-25932-7.
H. An, Z. Liu, and S. Mu, “Process analysis of a novel coal-to-methanol technology for gasification integrated solid oxide electrolysis cell (SOEC),” International Journal of Hydrogen Energy, vol. 48, no. 26, pp. 9805-9811, 2023, doi: 10.1016/j.ijhydene.2022.11.300.
L. Ting T, W. Hasanah N, S. Rohman F, et al., “Modeling and control of steam methane reforming process using model predictive control,” ASEAN Journal of Process Control, vol. 2, no. 1, pp. 1-13, 2023.
M. Tang, B. An, J. Qiu, et al., “Multi-model predictive control of SCR flue gas denitrification system in coal-fired power plant based on kernel fuzzy c-means clustering and integrated model,” The Canadian Journal of Chemical Engineering, vol. 102, no. 2, pp. 748-764, 2024, doi: 10.1002/cjce.25082.
J. Wang, B. Ding, and P. Wang, “Modeling and finite-horizon mpc for a boiler-turbine system using minimal realization state-space model,” Energies, vol. 15, no. 21, pp. 7935-7955, 2022, doi: 10.3390/en15217935.
Y. Jia, Y. Dong Z, C. Sun, et al., “A tube-based distributed MPC based method for low-carbon energy networks with exogenous disturbances,” IEEE Transactions on Network Science and Engineering, vol. 12, no. 1, pp. 381-391, 2024, doi: 10.1109/TNSE.2024.3497577.
H. Hou, M. Gan, X. Wu, et al., “Real-time energy management of low-carbon ship microgrid based on data-driven stochastic model predictive control,” CSEE Journal of Power and Energy Systems, vol. 9, no. 4, pp. 1482-1492, 2023.
B. Decardi-Nelson and J. Liu, “Robust economic MPC of the absorption column in post-combustion carbon capture through zone tracking,” Energies, vol. 15, no. 3, pp. 1140-1159, 2022, doi: 10.3390/en15031140.
Z. Hou, L. Chu, W. Du, et al., “A novel dual-model MPC-based energy management strategy for fuel cell electric vehicle,” IEEE Transactions on Transportation Electrification, vol. 10, no. 4, pp. 8585-8604, 2024, doi: 10.1109/TTE.2024.3369081.
M. Shen, B. Tang, and K. Zhang, “Low carbon operation optimisation strategies for heating, ventilation and air conditioning systems in office buildings,” International Journal of Production Research, vol. 62, no. 18, pp. 6781-6800, 2024, doi: 10.1080/00207543.2024.2325582.
H. Ni, Y. Wang, X. Tang, et al., “An Intelligent Two-Stage Dispatch Framework for Cost and Carbon Reduction in Multi-Energy Virtual Power Plants,” Processes, vol. 14, no. 5, pp. 743-763, 2026, doi: 10.3390/pr14050743.
I. Beloglazov and V. Plaschinsky, “Development MPC for the grinding process in SAG mills using DEM investigations on liner wear,” Materials, vol. 17, no. 4, pp. 795-820, 2024, doi: 10.3390/ma17040795.
Z. Yang, F. Yang, W. Hu, et al., “Delay compensation control strategy for electric vehicle participating in frequency regulation based on MPC algorithm,” Electronics, vol. 11, no. 15, pp. 2341-2357, 2022, doi: 10.3390/electronics11152341.
H. Fan, E. Lu, W. Yu, et al., “Multi-agent deep reinforced co-dispatch of energy and hydrogen storage in low-carbon building clusters,” IEEE Transactions on Network Science and Engineering, vol. 11, no. 6, pp. 5449-5462, 2023, doi: 10.1109/TNSE.2023.3243202.
N. Degiuli, I. Marti´c, and G. Grlj C, “Slow Steaming as a Sustainable Measure for Low-Carbon Maritime Transport,” Sustainability, vol. 16, no. 24, pp. 11169-11186, 2024, doi: 10.3390/su162411169.
R. Cownden, D. Mullen, and M. Lucquiaud, “Towards net-zero compatible hydrogen from steam reformation-Technoeconomic analysis of process design options,” International Journal of Hydrogen Energy, vol. 48, no. 39, pp. 14591-14607, 2023, doi: 10.1016/j.ijhydene.2022.12.349.
R. Quirynen, S. Safaoui, and S. Di Cairano, “Real-time mixed-integer quadratic programming for vehicle decision-making and motion planning,” IEEE Transactions on Control Systems Technology, vol. 33, no. 1, pp. 77-91, 2024, doi: 10.1109/TCST.2024.3449703.
X. Cao, X. Pu, C. Hua, et al., “Neural dynamics for constrained bi-objective quadratic programming with applications to scientific computing,” Tsinghua Science and Technology, vol. 30, no. 5, pp. 2014-2028, 2025, doi: 10.26599/TST.2024.9010152.
H. Lu and J. Yang, “A practical and optimal first-order method for large-scale convex quadratic programming: H,” lu, j. yang. Mathematical Programming, vol. 215, no. 1, pp. 771-808, 2026, doi: 10.1007/s10107-025-02241-0.
Y. Fang, S. Na, W. Mahoney M, et al., “Fully stochastic trust-region sequential quadratic programming for equality-constrained optimization problems,” SIAM Journal on Optimization, vol. 34, no. 2, pp. 2007-2037, 2024, doi: 10.1137/22M1537862.