Phase Transformation Behavior in the Preparation of High-Temperature Ceramic Materials and Its Influence on Mechanical Properties
Main Article Content
Abstract
Phase transformation behavior plays a critical role in determining the microstructural stability and mechanical reliability of high-temperature ceramic materials used in extreme-service environments. This study investigates the mechanisms governing phase evolution during ceramic preparation and analyzes their influence on strength, toughness, and structural integrity. Particular attention is given to the coupling among transformation kinetics, thermal history, lattice distortion, and residual stress development. Three key challenges are identified, including unstable phase-transition control, transformation-induced volumetric stress, and mismatches between phase-transition temperatures and processing parameters. To address these issues, a systematic optimization framework is proposed based on precise sintering regulation, additive-assisted phase stabilization, and multi-parameter collaborative control. The framework integrates thermodynamic analysis, phase-field simulation, finite-element modeling, and online process monitoring to establish quantitative relationships among processing conditions, phase evolution, microstructure formation, and mechanical performance. Furthermore, advanced processing approaches, including microwave-assisted sintering and intelligent parameter optimization, are incorporated to improve phase stability and suppress defect formation. The proposed methodology provides an engineering-oriented strategy for phase-transition regulation, microstructure control, and reliability enhancement of high-temperature ceramic systems, with potential applications in electromagnetic-assisted materials processing and advanced energy-related environments.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
F. Guo, Z. Yin, and J. Yuan, “Phase transformation kinetics and grain orientation of multi-cation doped (Yb, Sm) alpha/beta-SiAlON ceramic tool materials,” Ceramics International, no. 17 Pt.A, p. 49, 2023, doi: 10.1016/j.ceramint.2023.06.041.
Y. W. Yen, F. Y. Hung, J. R. Zhao, B. D. Wu, and H. Y. Hsieh, “A study on thermal-induced phase transformation behavior and deterioration mechanism of 310S stainless steel,” Microelectronics Journal, vol. 6, no. 000, 2024, doi: 10.1016/j.jalmes.2024.100069.
A. Y. Stroeva, Z. N. Ichetovkin, and A. V. Kuzmin, “The Lanthanum-Scandate-and Lanthanum-Cobaltite-Based Composite Materials for Proton–Ceramic Electrochemical Devices,” Russian Journal of Electrochemistry, vol. 60, no. 1, pp. 36-43, 2024, doi: 10.1134/S1023193524010117.
B. G˛edziorowski, K. Cichy, A. Niemczyk, A. Olszewska, Z. Zhang, S. Kopeć, et al., “Ruddlesden-Popper-type Nd 2-x Ni 1-y Cu y O 4±δ layered oxides as candidate materials for MIEC-type ceramic membranes,” Journal of the European Ceramic Society, 2020, doi: 10.1016/j.jeurceramsoc.2020.04.054.
O. U. oshev, T. V. Safronova, T. B. Shatalova, and Y. S. Lukina, “Ceramic Materials in Na2O-CaO-P2O5 System, Obtained via Heat Treatment of Cement-Salt Stone Based on Powder Mixture of Ca3(C6H5O7)24H2O, Ca(H2PO4)2H2O and NaH2PO4,” Ceramics, vol. 6, no. 1, p. 19, 2023, doi: 10.3390/ceramics6010036.
R. “Yu,” Popov, E. O. Bogdan, and O. A. Sergievich, “Influence of zinc-containing compounds on the properties of ceramic materials based on the Li2O–MgO–Al2O3–SiO2 system,” Proceedings of the National Academy of Sciences of Belarus, Chemical Series, vol. 60, no. 1, pp. 73-80, 2024, doi: 10.29235/1561-8331-2024-60-1-73-80.
R. D. Kapustin, A. O. Kirillov, and V. I. Uvarov, “The influence of structural-dimensional parameters of α-Al2O3 filler on the morphology and properties of porous ceramic materials,” NOVYE OGNEUPORY (NEW REFRACTORIES), no. 8, pp. 42-49, 2024, doi: 10.17073/1683-4518-2024-8-42-49.
K. Kaczmarczyk, J. Němeček, J. Partyka, and A. Wojteczko, “Nanomechanical properties of ceramic materials from the SiO2–Al2O3- (Na2O)–K2O–MgO system with an addition of SrO,” Ceramics International, vol. 50, no. 17-PartA, pp. 30306-30315, 2024, doi: 10.1016/j.ceramint.2024.05.328.
E. A. Asabina, V. I. Pet’kov, I. A. Stenina, and A. B. Yaroslavtsev, “Synthesis and ionic conductivity of Na1+2xMxZr2-x(PO4)3 (M – Mg, Mn) NASICON-type ceramic materials,” Solid State Sciences, vol. 160, no. 000, 2025, doi: 10.1016/j.solidstatesciences.2024.107786.
A. A. Nesterov and M. I. Tolstunov, “Production Technology and Properties of High-Temperature Piezoceramic Materials Based on Phases in the System (1 – y) (Bi0.8Ba0.2) Fe0.8Ti0.2O3–y (Ba0.85Ca0.15) Ti0.90Zr0.10O3,” Inorganic materials: applied research, vol. 14, no. 5/6, pp. 1429-1434, 2023, doi: 10.1134/S2075113323050313.
A. V. A Kasyanova, A. S. Kalashnikova, G. K. Vdovin, and D. A. Medvedev, “Low-temperature transport properties of isovalent-substituted La0.9Sr0.1YbO3–δ ceramic materials,” Journal of Solid State Electrochemistry, 2023, doi: 10.1007/s10008-023-05574-y.
J. Dai, W. Yang, R. Mu, Z. Shen, H. Tian, and L. He, “Preparation and High-Temperature Stability of (Zr1/5La1/5Sm1/5Dy1/5Gd1/5) O2x High-Entropy Ceramic Materials,” Journal of Materials Engineering and Performance, vol. 34, no. 7, 2025, doi: 10.1007/s11665-024-09573-6.
Y. Joshi, A. Saksena, E. Hadjixenophontos, J. M. Schneider, and G. Schmitz, “Electrochromic Behavior and Phase Transformation in Li 4+x Ti 5 O 12 upon Lithium-Ion De/Intercalation,” ACS Applied Materials & Interfaces, 2020, doi: 10.1021/acsami.9b19683.
G. Yang, J. Zuo, L. Cheng, Y. Wang, B. Zhu, S. Han, et al., “Phase transformation behavior of Ti–40Al–8Nb alloys with a submicron (ω0 + γ) microstructure during tempering at 1000◦C,” Journal of Materials Research and Technology, vol. 18, no. 000, p. 10, 2022, doi: 10.1016/j.jmrt.2022.02.100.
T. Sitharam, S. Dinesh, and N. Shimizu, “Phase Transformation behavior in Granular Materials using DEM,” Powders and Grains 2001, 2020, doi: 10.1201/9781003077497-60.