Frequency Behavior of Conformal Wire Structures
Main Article Content
Abstract
Three-dimensional models are built to examine the frequency behavior of wire structures conforming onto nonplanar surfaces. The effects of altered periodicity on frequency selectiveness of the structures are considered. An analogy is drawn with the antenna impedance behavior of a single active wire surrounded by a number of passive similar ones. Numerical simulations are performed for different wire geometries over a conical surface.
Downloads
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
B. A. Munk, Frequency Selective Surfaces: Theory and Design, John Wiley & Sons Inc, New York, 2000.
T. K. Wu, Frequency Selective Surface and Grid Array, John Wiley & Sons Inc, New York, 1995.
F. Mattiello, G. Leone, G. Ruvio, Analysis and Characterization of Finite-size Curved Frequency Selective Surfaces, Studies in Engineering and Technology, Redfame Publishing, 2015.
R. U. Nair, R. M. Jha, "Electromagnetic Design and Performance Analysis of Airborne Radomes: Trends and Perspectives", IEEE Antennas and Propagation Magazine, Vol. 56, No.4, pp. 276- 298, August 2014.
A. Dalkilic, L. Alatan, C.B. Top, "Analysis of conformal frequency selective surface radome", 8th European Conference on Antennas and Propagation (EuCAP), The Hague, The Netherlands, pp. 469-472, April 2014.
H. Zhou, S. Qu, B. Lin, J. Wang, H. Ma, Z. Xu, W. Peng, P. Bai, "Filter-antenna of conical FSS radome and monopole antenna", IEEE Transactions on Antennas and Propagation, vol 60, n. 6, pp 3040-3045, June 2012.
T. Cwik, R.Mittra, "The Effects of the Truncation and Curvature of Periodic Surfaces: A Strip Grating", IEEE Transactions on Antennas and Propagation,vol36, n. 5, pp612-622, May 1988.
E.A. Parker, B. Philips, R.J. Langley, "Analysis of Coupling Between a Curved FSS and an Enclosed Planar Dipole Array", IEEE Microwave and Guided Wave Letters, Vol. 5, N. 10. Oct. 1995.
C. Pelletti, G. Bianconi, R. Mittra, A. Monorchio, "Analysis of Finite Conformal Frequency Selective Surfaces via the Characteristic Basis Function Method and Spectral Rotation Approaches", IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 1404 - 1407, 2013.
Sipus, Z., Bosiljevac, M., "Efficient analysis of curved frequency selective surfaces", 3rd European Conference on Antennas and Propagation, 2009. EuCAP 2009, Berlin, Germany, pp. 2726 - 2730, March 2009.
G. Leone, F. Mattiello, G. Ruvio, R. Pierri, "Behaviour of conformal conical Frequency Selective Surfaces", Progress in Electromagnetics Research Symposium (PIERS) 2015, Prague, July 2015.