In-House Design, Manufacturing, and Testing of a 2.856 GHz Combline Microwave Cavity Filter for the Low-Level RF Systems of Linear Particle Accelerators
Main Article Content
Abstract
A combline microwave cavity filter has been developed to generate the 2.856 GHz radio frequency (RF) tone to be used as the master reference of SPARC_LAB electron linac facility at the Frascati National Laboratories of the National Institute for Nuclear Physics (LNF-INFN). The filter must select the 36th harmonic from a frequency comb with a repetition frequency of 79.33MHz and reject the other harmonics. The comb is generated by the electric conversion of the laser pulse train from the oscillator of the photocathode laser. Since a filter for this very specific application is off-the-shelf, it was designed, manufactured, and tested in-house at LNF-INFN. The measured insertion loss at the center frequency is 2.2 dB, the bandwidth is 30MHz (percentage fractional bandwidth is 1.1 %). This narrow bandwidth is required to ensure effective rejection (insertion loss > 65 dB) of adjacent harmonics in the frequency comb, specifically at frequencies of 2.77633 GHz and 2.93533 GHz. The purpose of filtering is to ensure that the tone, distributed in the low-level RF system, remains clean and can be used to synchronize the most crucial machine subsystems, such as RF power units, accelerating cavities, diagnostic systems, and lasers.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
A. V. Edwards, M. Boronat Arevalo, N. Catalán Lasheras, A. C. Dexter, and G. McMonagle, "Commissioning of a new X-band, low-noise LLRF system," in Proc. IPAC, Campinas, SP, Brazil, 2021, pp. 2683-2686. DOI: 10.18429/JACoW-IPAC2021-WEPAB038.
L. Piersanti et al., "Design of an X-band LLRF system for TEX test facility at LNF-INFN," in Proc. IPAC, Campinas, SP, Brazil, 2021, pp. 3371-3374. DOI: 10.18429/JACoW-IPAC2021-WEPAB301.
L. Piersanti et al., "Commissioning and first results of an X-band LLRF system for TEX test facility at LNF-INFN," in Proc. IPAC, Bangkok, BKK, Thailand, 2022, p. 12075. DOI: 10.1088/1742-6596/2420/1/012075.
M. Ferrario et al., "SPARC-LAB present and future," Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, vol. 309, pp. 183-188, 2013, DOI: 10.1016/j.nimb.2013.03.049.
R. J. Cameron, C. M. Kudsia, and R. R. Mansour, Microwave Filters for Communication Systems, 2nd ed. Hoboken, NJ, USA: Wiley, 2018. DOI: 10.1002/9781119292371.
Dassault Systèmes, "CST Studio Suite," 2025. [Online]. Available: https://www.3ds.com/products services/simulia/products/cst-studio-suite/
E. Boni, G. Giannetti, S. Maddio, and G. Pelosi, "Fast and efficient systematic procedure for and flexibility on the end coupling design in microwave filters," in Proc. KH2023, Miltenberg, BY, Germany, 2023. [Online]. Available: https://ieeexplore.ieee.org/document/10296826
E. Boni, G. Giannetti, S. Maddio, and G. Pelosi, "Capacitive endcouplings in combline microwave cavity filters with probe parallel to resonators' axes: comparison and design guidelines," in Proc. KH2023, Miltenberg, BY, Germany, 2023. [Online]. Available: https://ieeexplore.ieee.org/document/10296707
E. Boni, G. Giannetti, S. Maddio, and G. Pelosi, "Comparison of inductive and capacitive end couplings in the design of a combline microwave cavity filter for the E1 Galileo band," Advances in Radio Science, vol. 22, pp. 1-8, 2024, DOI: 10.5194/ars-22-1-2024.
M. S. Anwar and H. R. Dhanyal, "Design of S-band combline coaxial cavity bandpass filter," in Proc. IBCAST, Islamabad, IS, Pakistan, 2018, pp. 866-869. DOI: 10.1109/IBCAST.2018.8312328.
Y. P. Yu and Y. F. Li, "Design of a small size C-band cavity bandpass filter," Microwave and Optical Technology Letters, vol. 64, no. 9, pp. 1507-1512, 2022, DOI: 10.1002/mop.33307.
E. Boni, G. Giannetti, S. Maddio, and G. Pelosi, "An equation-based method for the design of end couplings in combline microwave cavity filters," in Proc. IEEE AP-S, Portland, OR, USA, 2023, pp. 1473-1474. DOI: 10.1109/USNC-URSI52151.2023.10237496.
C.B.Ferrari s.r.l., "C.B.Ferrari," 2025. [Online]. Available: https://www.cbferrari.com/en/
D. M. Pozar, Microwave Engineering, 4th ed. New York, NY, USA:Wiley, 2011.
J. B. Ness, "A unified approach to the design, measurement, and tuning of coupled-resonator filters," IEEE Transactions on Microwave Theory and Techniques, vol. 46, no. 4, pp. 343-351, 1998, DOI: 10.1109/22.664135.
A. Rumiantsev and N. Ridler, "VNA calibration," IEEE Microwave Magazine, vol. 9, no. 3, pp. 86-99, 2008, DOI: 10.1109/MMM.2008.919925.
R. Mansour, "High-Q tunable dielectric resonator filters," IEEE Microwave Magazine, vol. 10, no. 6, pp. 84-98, 2009, DOI: 10.1109/MMM.2009.933591.
M. Yu, "Power-handling capability for RF filters," IEEE Microwave Magazine, vol. 8, no. 5, pp. 88-97, 2007, DOI: 10.1109/MMM.2007.904712.
Dassault Systèmes, "Spark3D," 2025. [Online]. Available: https://www.3ds.com/products/simulia/spark3d
D. G. Swanson, "Narrow-band microwave filter design," IEEE Microwave Magazine, vol. 8, no. 5, pp. 105-114, 2007, DOI: 10.1109/MMM.2007.904724.
A. Agarwal, R. Sharma, V. Srivani, and M. T. Wara, "Design of wide bandwidth filter at S-band for spacecraft testing applications," in Proc. SPACE, Bangalore, KA, India, 2024, pp. 986-989. DOI: 10.1109/SPACE63117.2024.10668228.
D. Psychogiou and R. Gomez-Garcia, "Reflectionless adaptive RF filters: bandpass, bandstop, and cascade designs," IEEE Transactions on Microwave Theory and Techniques, vol. 65, no. 11, pp. 4593-4605, 2017, DOI: 10.1109/TMTT.2017.2734086.
R. Gomez-Garcia, D. Psychogiou, J. M. Munoz-Ferreras, and L. Yang, "Avoiding RF isolators: reflectionless microwave bandpass filtering components for advanced RF front ends," IEEE Microwave Magazine, vol. 21, no. 12, pp. 68-86, 2020, DOI: 10.1109/MMM.2020.3023222.
Writefull, "Writefull," 2025. [Online]. Available: https://www.writefull.com/